FAQ
Regardless of how the YardsTech® Scales have been configured, you can always force it into WiFi hotspot mode (access point mode) by following these simple i...
Mon, 15 Nov, 2021 at 4:18 PM
Introduction The YardsTech® Scales will work with almost any type of load bars/cells, however they may need to be calibrated to the particular load bars/ce...
Thu, 30 Dec, 2021 at 8:41 AM
Following are some instructions on how to configure your EID reader wit the YardsTech® Scales. Note that you will have to use the YardsTech® App to configur...
Sun, 25 Jul, 2021 at 9:06 AM
You can connect your YardsTech® Scales to Stockbook in a couple of different ways: Connect via WiFi - this is the preferred method to connect the YardsTec...
Wed, 13 Apr, 2022 at 4:24 PM
IMPORTANT : before you begin, make sure your unit is charged. If the unit loses power during the update it can cause the unit to become non functional. ...
Fri, 29 Apr, 2022 at 7:33 PM
This article describes how to sync your session data from the YardsTech® app to the cloud. Ensure you have setup your FarmXL® account. Go to https://ww...
Mon, 5 Jul, 2021 at 8:46 AM
Changing the WiFi hotspot name may be useful if you wish to run two YardsTech® Scales in close proximity to each other. If both WiFi hotspots have the same ...
Wed, 13 Oct, 2021 at 9:18 AM
Overview The Te Pari drench gun operates over it's own WiFi network and as it can't currently be configured to connect to other networks, the Yar...
Mon, 15 Nov, 2021 at 4:19 PM
Overview If you already have WiFi access in the yards it is also possible to connect the YardsTech® Scales to that network. This article describes the proc...
Thu, 26 May, 2022 at 11:41 AM